Henny Penny COLD TOPS CMC/CMR-104 - Manual (Page 12)

Model CMC/CMR-103,104,105,106,107
2-11. COLD TOP ON A COLD
BASE INSTALLATION
INSTRUCTIONS 1. Remove bolts securing the Cold Top to the skid, and save bolts
for later use.
2. Carefully set Cold Top on top of the Cold Base.
Take care when moving the fryer to prevent personal
injury
or damage to the refrigeration system. The
CMC-107s weigh over 700 lbs. (318 kg).
3. Line up the 2 front holes and secure the top to the base using
the bolts from step 1. Figure 2-1.
4. Locate mounting hole in right, rear corner of the units and se-
cure the corner using one of the bolts from step 1. Figure 2-2.
5. Pull the control panel out from unit and locate the mounting hole
in the left, rear corner. Secure corner with one of the screws
from step 1. Figure 2-3.
6. Installation is now complete.
Figure 2-1
Figure 2-2
Figure 2-3
403 2-7