High End Systems DL1 - Manual (Page 47)

DL.1 User Manual Fixture Operation 3-15
3
Test Options Menu
The TEST OPTIONS MENU manually homes the fixture, performs fixture self tests, and
stores new boot code information. Performing fixture self tests may help identify
mechanical problems in the fixture.
Homing the Fixture
The fixture automatically homes all its functions whenever it is turned on. This menu
option manually homes the entire fixture.
To remotely home the fixture using a DMX controller, see “Control Function
Options” on page 4-4 in the DL.1 Standard Protocol table.
To manually home the fixture:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Use the left and right arrows on the Navigation button to scroll to the
TEST OPTIONS MENU and press the Enter button to select.
3. Use the left and right arrows on the Navigation button to scroll to HOME FIXTURE.
4. Using the up and down arrows on the Navigation button, choose ALL to home the
projector head or NO if you don’t want to home the projector.
Copying the Boot Code
When new software is uploaded to a fixture, it may contain a new boot code which
must be copied to each fixture. This is apparent if the fixture displays a BOOTDIFF
error.
Caution: Do not remove power from the fixture while performing a boot copy.
To accept and store the new boot code:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll to the
TEST OPTIONS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to the COPY BOOT
option.
4. Use the up and down arrows on the Navigation button to scroll to the YES option
and then press the Enter button to store the command. The fixture will store the
new boot code, then automatically home.