Hitachi 60SX4K - Manual (Page 18)

- 18 --SET
UP- FUNCTIONS
desired.
• AIR/CABLE
Select this function to change between regular VHF/UHF broadcasting (AIR) and cable
TV (CATV1 or CATV2)
Press the CURSOR buttons to highlight the correct AIR/CABLE mode and press MENU
to exit.
Reception channels for each mode are shown at the right.
Refer to your cable or TV guide for channel identification standards.
If certain CATV channels are poor or not possible in the CATV1 mode, set -AIR/CABLE-
select to CATV2.
• AUTOPROGRAM
This feature will automatically store active TV channels in CHANNEL MEMORY. This
will allow you to skip over unused channels when using the CHANNEL UP (
) or
DOWN ( ) buttons.