Hitachi 60SX4K - Manual (Page 28)

- 28 --
SOUND- FUNCTIONS
• Match the numbers below to the diagram for speaker placement and refer to the table
for the surround sound requirements.
The television's internal speakers.
These speakers are connected to a separate audio amplifier. Use the "Audio to Hi-If"
output on the TV.
These speakers are connected to the Rear Speaker 8 output on the TV.
Click to see Audio System Set-Up
-SOUND- FUNCTIONS
Press MENU, 3, ENTER to display the -SOUND- functions.
SOUND PROGRAM is for your preferred settings - balance, bass and treble.
SOUND SETTING is used to improve the sound quality.
SURROUND is used for special sound effects.
• SOUND PROGRAM
You can have two sets of preferred settings, PREFERENCE-A, PREFERENCE-B or
use the factory PRESET settings.
Press MENU, 3, ENTER, 1, ENTER to select the SOUND PROGRAM.
Press the CURSOR buttons to select and make adjustments.
BALANCE - This function will control the left, right balance of the TV internal speakers,
the AUDIO TO HI-FI output, and the surround speakers.
BASS - This function controls the low frequency audio to all speakers.
TREBLE - This function controls the high frequency to all speakers.
• SOUND SETTING
Use the sound settings to improve the sound performance of your TV depending on
listening conditions.