Homelite UT34010 - Manual (Page 9)

9
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME EXPLANATION
SAFE-T-TIP The SAFE-T-TIP® nose guard on your bar
nose prevents rotational kickback.
Bar nose contact Avoid bar nose contact.
Holding saw Hold saw properly with both hands.
NOTE: Save these instructions. Refer to them frequently and use them to instruct others who may use this unit. If
you loan someone this unit, loan them these instructions also.
SAVE THESE INSTRUCTIONS
SYMBOLS
WARNING:
The operation of any power tool can result in foreign objects being thrown into your
eyes, which can result in severe eye damage. Before beginning tool operation, always
wear safety goggles or safety glasses with side shields and a full face shield when
needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard
safety glasses with side shields. Always wear eye protection which is marked to comply
with ANSI Z87.1.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding. The safety warnings do not by
themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident
prevention measures.
DANGER:
Indicates an imminently hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in
serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury. It may also be used to alert against unsafe practices that may cause property
damage.
NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.
SYMBOL MEANING