How to use the genius remote to control your tv – Hitachi 50EX01B User Manual

Page 20

Advertising
background image

20

HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV

PICTURE-IN-PICTURE buttons
See separate section on page 22 for a description.

PIP CH button
Use the PIP CH button to select between main picture and sub-picture tuning. The channel number which is highlighted indicates
which channel is being controlled.

HELP button
50EX01B/60EX01B models do not have HELP feature.

LAST CHANNEL (LST-CH) button
Use this button to select between the last two channels viewed. (Good for watching two sporting events, etc.)

NOTE:

The TV may not receive some channels if you are not in the correct SIGNAL SOURCE mode. (see page 32)

VOLUME, MUTE buttons
Press the VOLUME up (

̆) or down (̄) button until you obtain the desired sound level.

To reduce the sound to one half of normal volume (SOFT MUTE) to answer the telephone, etc., press the MUTE button. Press the
MUTE button again to turn the sound off completely (MUTE). To restore the sound, press the MUTE button one more time, or press
the VOLUME Up (

̆) button.

CHANNEL selector buttons
CHANNEL selector buttons are used to set FAMILY FAVORITES, CHANNEL MEMORY, etc.
Enter two or three numbers to select channels. Enter 0 first for channels 1 to 9. For channels 100 and above, press the 1
button, wait until another two dashes appear next to the channel display on your TV, then enter the remaining two numbers using
the number buttons.
Channel selection may also be performed by pressing CH up (

̆

) or down (

̄

).

LST-CH

ANT 10

ANT 39

VOLUME 08

MUTE 08

SOFTMUTE 08

MUTE

MUTE

Advertising
This manual is related to the following products: