HTC SAPPHIRE SM-TP008-1125 - Manual (Page 61)

2/10/2009 9:51:19 PM
HTCUSA-200015
Doc. No. DOC-00051810 REV.
Issued Date 2008/12/29
.
Revised Date 2009/01/14
AX02
Doc. Title Sapphire Service Manual Page 61 of 91
HTC CONFIDENTIAL
SM-TP008-1125
HTC Corporation.
5.3 Main unit inspection
GAP & STEP INSPECTIONS
Description Accept Criteria
1. Gap between ME parts. 1.5 (mm)
2. Stylus
Stylus assembly protruding, loose, missing, falling and
deformed is not allowed.
3.
Others, refer to production
release spec
Others, refer to production release spec
OTHERS
Scratch
Description Accept Criteria
Class A
Exposure of substrate do not accept
Scratch : L 4mm ,W 0.2mm ,N 2, S 10mm
MI
Class C
Label area don’t care
Exposure of substrate do not accept
Scratch : L 10mm ,W 0.4mm ,N 5, S 5mm
MI
Contamination dot/Granule dot/Cave granule
Description Accept Criteria
Class A D 0.5mm ,N 2,S 15 mm (Ignored if D D 0.15mm) MI
Class C D<0.9mm ,N 4,S 10 mm MI
Burr
Description Accept Criteria
Burr. Don’t accept hand scrape MI
Imprint mark
Description Accept Criteria
Class A 0.25 diameter 0.65mm ,N 3 MI
Bright mark
Description Accept Criteria
Class A L 2.5mm,W 0.25mm,N 3 MI
Class C L 3.0mm,W 0.3mm,N 5 MI
Lint
Description Accept Criteria
Class A L 3mm , W 0.2mm ,N 2, S 5 mm MI
Class C L 10mm , W 0.3 mm ,N 3 MI