HP 212M User Manual
Page 125
7-17
Monitoring and Analyzing Switch Operation
IP Multicast (IGMP) Status
Monito
ring
and Analyzing
Switch Ope
rati
on
You can also display the port status of the individual multicast groups. (That
is, you can display the ports, port types, and whether the IGMP devices
connected to the switch via the port are hosts, routers, or both.) To do so,
select the group from the above screen and press
[S] for Show ports. For
example, suppose you wanted to view the status of the IP multicast group
224.0.1.24 shown in the above screen. You would highlight the row beginning
with that group number, then press
[S]. You would then see a screen similar
to the following:
Figure 7-15. Example of an IGMP Status Screen for a Selected Multicast Group
Sraswb.book : SIER_SW7.FM Page 17 Tuesday, June 30, 1998 12:20 PM