HP 212M - Manual (Page 58)

4-12
Using the Switch Console
Rebooting the Switch
Usi
ng the Sw
itch Console
Rebooting the Switch
Rebooting the switch terminates the current console session and performs a
reset of the operating system. Some of the reasons for performing a reboot
include:
■ Activating certain configuration changes that require a reboot
■ Resetting statistical counters to zero
To Reboot the switch, use the Reboot Switch option in the Main menu. (Note
that the Reboot Switch option is not available if you log on in Operator mode;
that is, you enter an Operator password at the password prompt.)
Figure 4-5. The Reboot Switch Option in the Main Menu
Reboot Switch option
Sraswb.book : SIER_SW4.FM Page 12 Tuesday, June 30, 1998 12:20 PM