Using the switch console to configure the console, To access console/serial link features – HP 212M User Manual
Page 85
6-21
Configuring the Switch
Console/Serial Link
Config
urin
g the Sw
itch
Using the Switch Console To Configure the Console/
Serial Link
This screen enables you to:
■
Enable or disable inbound Telnet, and web browser interface access
(identified as
Web Agent Enabled)
■
Modify console and serial link parameters
To Access Console/Serial Link Features
1.
From the Main Menu, select:
2. Switch Management Access Configuration (IP, SNMP, Console)...
4. Console/Serial Link Configuration
Figure 6-7. The Console/Serial Link Configuration Screen (Default Values)
2.
Press
[E] (for Edit). The cursor moves to the Inbound Telnet Enabled field.
3.
Refer to the online help provided with this screen for further information
on configuration options for these features.
4.
When you have finished making changes to the above parameters, press
[Enter], then press [S] (for Save) and return to the Switch Management
Access Configuration menu.
Sraswb.book : SIER_SW6.FM Page 21 Tuesday, June 30, 1998 12:20 PM