Configuring system information from the console, To access system information – HP 212M User Manual
Page 87
6-23
Configuring the Switch
System Information
Config
urin
g the Sw
itch
Configuring System Information from the Console
To Access System Information:
1.
From the Main Menu, select:
3. Switch Configuration...
1. System Information
Figure 6-9. The System Configuration Screen (Default Values)
N o t e :
To help simplify administration, it is recommended that you configure
System Name to a character string that is meaningful within your network.
To set the time and date, set the Time Protocol parameters under “IP (Internet)
Service” (page page 6-5) for your time server, or use the time and date
commands described in chapter 7, “Monitoring and Analyzing Switch Opera-
tion”.
2.
Press
[E] (for Edit). The cursor moves to the System Name field.
3.
Refer to the online help provided with this screen for further information
on configuration options for these features.
4.
When you have finished making changes to the above parameters, press
[Enter], then press [S] (for Save) and return to the Switch Configuration
menu.
System Name
Sraswb.book : SIER_SW6.FM Page 23 Tuesday, June 30, 1998 12:20 PM