HP 7200 User Manual
Page 174
I received a message on the control panel display to attach the control panel
overlay
Solution
This might mean the control panel overlay is not attached, or it is
attached incorrectly. Lift the lid before you install the overlay. Make sure to align
the overlay over the buttons on the top of the HP All-in-One and snap it firmly into
place.
The control panel display shows the wrong language
Solution
Usually, you set the language and country/region when you first set
up the HP All-in-One. However, you can change these settings at any time by
using the following procedure:
1.
Press
Setup
.
2.
Press
7
, and then press
1
.
This selects
Preferences
, and then selects
Set Language & Country/Region
.
A list of languages appears. You can scroll through the list of languages by
pressing the .
User Guide
171
Troubleshooting
information