Hypertec PC Card 10/100 TX - Manual (Page 5)

3. From the Program Manager, select File Menu.
(For Windows 95, select the start menu)
4. Select Run…
5. Type A:\SETUP and select OK.
6. Follow the Help utility's on-screen instructions for the setup process.
DOS Installation
Look at the README file.
Software Included
ODI workstation drivers for Novell NetWare, NetWare Lite, Novell DOS 7 and
OS2
NDIS 2.0.1 driver for Microsoft LAN Manager, Windows for Workgroups, Artisoft
LANtastic, Banyan Vines, OS2 and others.
NDIS 3 for Windows 98, Windows 95 and Windows NT
Wizard utility for installation, self-test and diagnostics
Disconnecting the HyperNet PC Card 10/100 TX
To remove the card from the computer PCMCIA slot, activate the release switch
located on your computer. Alternatively, you may simply disconnect the media
coupler, and leave the HyperNet PC Card in place in the slot ready for you to use it
next time you need it.
To remove the media coupler from the card, gently squeeze the plastic clip
depressors located on the coupler and separate it from the card.
Never disconnect the HyperNet PC Card by pulling on the cable.
If at any time during installation you experience difficulties, please contact
Hypertec Technical Support on +44 1488 686844 (01488 686844 in the UK).