HP XP12000 - Manual (Page 50)

52 HP StorageWorks Disk Array XP Operating System Configuration Guide: HP-UX
drwxr-xr-t 2 root root 8192 Mar 15
11:35 lost+found
-rwxr-xr-x 1 root sys 217088 Mar 15
11:41 vi.back1
-rwxr-xr-x 1 root sys 217088 Mar 15
11:52 vi.back2
Setting and verifying the auto-mount parameters
Set up and verify the auto-mount parameters for each new volume. The
/etc/checklist file (which can also be called the /etc/fstab file) contains the
auto-mount parameters for the logical volumes.
To set up and verify the auto-mount parameters:
1. Edit the /etc/checklist (/etc/fstab) file to add a line for each
OPEN-x device on the disk array. This example and the following table
show the auto-mount parameters.
Example
#cp -ip /etc/checklist /etc/checklist.standard
#vi /etc/checklist
/dev/vg00/lvol1 / hfs rw 0 1 # root
/dev/vg00/lvol2 swap ignore rw 0 0 # primary swap
:
/dev/vg06/lvol1 /AHPMD-LU00 hfs defaults 0 2 # AHPMD-LU00
/dev/vg06/lvol2 /AHPMD-LU01 hfs defaults 0 2 # AHPMD-LU01
P1 P2 P3 P4 P5 P6 P7