Hitachi B 16RM - Manual (Page 7)

— 7 —
English
RECOMMENDED ACCESSORIES
WARNING
Use only accessories recommended for this drill press.
Follow the instructions that accompany the accessories.
Use of improper accessories may cause hazards.
Visit your Hardware Department or see the Power and
Hand Tools Catalog for the following accessories:
ⅷ Drill bits
ⅷ Hold-Down Clamps
ⅷ Drill press Vises
ACCESSORIES AND ATTACHMENTS
UNPACKING AND CHECKING CONTENTS
WARNING
If any part is missing or damaged, do not plug the drill
press in until the missing or damaged part is replaced,
and assembly is complete.
Carefully unpack the drill press and all its parts, and
compare against the list below.
To protect the drill press from moisture, a protective
coating has been applied to the machined surfaces.
Remove this coating with a soft cloth moistened with
kerosene or WD-40.
WARNING
To avoid fire or toxic reaction, never use gasoline,
naphtha, acetone, lacquer thinner or similar highly volatile
solvents to clean the drill press.
CARTON CONTENTS
WARNING
Use only accessories designed for this drill press to avoid
injury from broken parts or thrown workpieces.
You may recommend other accessories not listed in this
manual. See your nearest your store or Power and Hand
Tool Catalog for all other accessories.
Do not use any accessory unless you have completely
read the instruction or operator’s manual for that
accessory.
TABLE OF LOOSE PARTS
ITEM DESCRIPTION QUANTITY
A. Head assembly 1
B. Table 1
C. Base 1
D. Column assembly 1
Loose parts bag:
E. Feed handle 3
F. Lock handle 1
G. Crank Handle 1
H. Hex bolts 4
I. Batteries 2
M. Hex wrenches 3
N. Wedge 1
O. Arbor 1
Box:
P. Chuck key 1
Q. Chuck 1