HP 5400c Series - Manual (Page 110)

110 Troubleshooting and maintaining Back to TOC


.



 



1 Remove any pages from the ADF input tray.
2 Remove the input tray from the ADF.
3 Gently pull the paper out of the ADF in the feeding direction
(towards you).
4 If you still cannot remove the paper from the ADF, lift the ADF lid to
its fully open position, loosen the jammed paper from the roller at
the rear of the ADF lid, and pull it gently from the ADF.
5 When you have successfully cleared the jam, attach the input tray
and close the hatch. Press down firmly on both sides until you hear
a click.
6 Restack all pages and reload them into the ADF.
7 On the ADF prompt on the computer, reselect any settings you had
changed and click Scan To or Scan again.