HP 4200 series User Manual
Page 153
user guide
troubleshooting information
143
tr
oubl
eshooting
The front panel
displays the wrong
language
The HP Officejet has been set up with the incorrect language or
country/region. Usually, you set the language and country/region
when you first set up the HP Officejet. However, you can change
these settings at any time by using the following procedure:
1
Press
Setup
.
2
Press
6
, then press
3
.
This selects Preferences and then selects Set Language &
Country/Region.
After starting the routine, the following prompt is presented on
the front panel display:
Press 11 for English?
If you want to change the language to English, enter 11 using
the keypad, or you can also scroll through the languages
using " or !. Otherwise, wait for five seconds and the
display changes automatically to the next available
language. When you see the language you want, enter its
two-digit number using the keypad.
3
When prompted to confirm the language, press
1
for Yes or
2
for No.
You are prompted with all the countries/regions for the
selected language. You can also scroll through the countries/
regions using " or !.
4
Using the keypad, enter the two-digit number for the desired
country/region.
5
When prompted, press
1
for Yes or
2
for No.
6
You can confirm the language and country/region by
printing a Self-Test Report, as follows:
a. Press
Setup
.
b. Press
1
, then press
5
.
This selects Print Report, and then selects Self-Test Report.
I received a message
on the front panel
display to align the
print cartridges
The HP Officejet prompts you to align cartridges every time you
install a new print cartridge. For more information, see
problem
possible cause and solution