How your hp officejet will answer fax calls, Case b: faxing with a distinctive, Ring service on the same line – HP 4200 series User Manual

Page 134

Advertising
background image

hp officejet 4200 series

chapter 12

124

fa

x setup

case B: faxing with a distinctive ring service on the same line

If you subscribe to a distinctive ring service through your phone company that
allows you to have multiple phone numbers on one phone line, each with a
different ring pattern, connect your HP Officejet as described in this section.

1

Using the phone cord supplied in the box with your HP Officejet, connect
one end to your telephone wall jack, then connect the other end to the port
labeled “1-LINE” on the back of your HP Officejet.

Caution!

If you do not use the supplied cord to connect from the

telephone wall jack to your HP Officejet, you probably will not be
able to fax successfully. This special 2-wire cord is different from
the more common 4-wire phone cords you might already have in
your office. For more information about how to tell the difference
between the cords, see

I have difficulties when sending faxes and

when receiving faxes

on page 146.

2

Press the

Answer Mode

button on the front panel until

Fax

appears on the

display.

3

Change the

Answer Ring Pattern

setting to the pattern that has been

assigned by the phone company to your fax number—for example, double
rings or triple rings.
a. Press

Setup

.

b. Press

4

, then press

1

.

c. Press ! to scroll through the options.
d. When the ring pattern that the phone company established for your fax

number appears on the display, press

OK

.

Note:

Your HP Officejet is factory-set to answer all ring patterns. If you do

not set the correct ring pattern assigned by the phone company to your fax
number, your HP Officejet might answer both voice calls and fax calls or it
might not answer at all.

how your hp officejet will answer fax calls

Your HP Officejet will automatically answer incoming calls that have the ring
pattern you selected (Answer Ring Pattern setting) after the number of rings you
selected (Rings to Answer setting). Then it will begin emitting fax reception tones
to the sending fax machine and receive the fax.

Use the phone cord
supplied in the box with
your HP Officejet

Telephone
wall jack

Back view of the HP Officejet

Advertising
This manual is related to the following products: