HP vp6300 - Manual (Page 56)

Installing Permanently 56
VPOS value, +, –, ? Sets or queries the vertical positioning of the projected image:
usable range is the maximum and minimum allowed by the
active computer input source.
HPOS value, +, –, ? Sets or queries the horizontal positioning of the projected
image: usable range is the maximum and minimum allowed by
the active computer input source.
HIDE 0, 1, ? Sets or queries picture blanking: 0=not hidden, 1=hidden.
WIDE 0, 1, ? Sets or queries wide screen mode: 0=normal, 1=wide.
KEYR None Resets keystone to zero.
Audio functions
Command Parameters Description
MUTE 0, 1, ? Sets or queries audio muting: 0=not muted, 1=muted.
VOL 0 to 31, +, –, ? Sets or queries audio volume: 0=off, 31=maximum.
INTSP 0, 1, ? Sets or queries usage of the internal speakers: 0=disabled,
1=enabled.
Setup functions
Command Parameters Description
LANG 0 to 10, ? Sets or queries the language used by the projector: 0=English,
1=French, 2=Italian, 3=German, 4=Portuguese, 5=Spanish,
6=Traditional Chinese, 7=Simplified Chinese, 8=Korean,
9=Japanese, 10=Czech.
LSAV 0, 1, ? Sets or queries low-power operating mode: 0=normal power,
1=low power.
LHRS ? Queries the time (in tenths of hours) that the lamp has been in
use.
Video functions (continued)
Command Parameters Description