HTC Touch by HTC VOGU100 - Manual (Page 99)

Getting Connected 99
10.2 Connecting to the Internet
Dial-up connection
Your device’s networking capability allows you to access the Internet through the dial-up connection. Settings
for connecting to your service provider’s 1xRTT/EVDO network are already preconfigured on your device, and
your device is ready to connect to the Internet. Please do not change these settings as this may cause your
data connection to stop working.
If you need to use another dial-up connection from an ISP (Internet Service Provider), you can manually
add it to your device. To establish a dial-up connection on your device, you need the same settings that you
normally use when you dial up from your computer. This includes the ISP server phone number, your user
name and password.
1. Tap Start > Settings > Connections tab > Connections.
2. Under My ISP, tap Add a new modem connection.
3. On the Make New Connection screen, enter a name for the connection.
4. In the Select a modem list, select Cellular Line, then tap Next.
5. Enter the ISP server phone number, then tap Next.
6. Enter your user name, password, and any other information required by your ISP.
7. Tap Finish.
Tips • To view help information for any screen, tap the Help icon ( ) on the Connections screen.
• To modify your connection settings, tap Manage existing connections on the Connections screen, and
complete the connection wizard.
Work network connection
A Virtual Private Network (VPN) connection allows you to access your company network through your device’s
Internet connection. Whereas a proxy connection lets you access the Internet using an existing connection to
your corporate or WAP network.
1. Obtain the following information from your network administrator:
• Server phone number
• User name and password
• Domain (and other required settings, such as IP address)
2. Tap Start > Settings > Connections tab > Connections.
3. In My Work Network, follow the instructions for each type of connection.
4. Complete the connection wizard, then tap Finish.
Start a data connection
After setting up a data connection such as the ISP dial-up on your device, you can now connect your device
to the Internet. The connection is started automatically when you begin using a program that accesses the
Internet such as Internet Explorer® Mobile.
To manually start a data connection
If you have set up multiple types of data connections on your device, you can manually start a connection.
1. Tap Start > Settings > Connections tab > Connections.
2. Tap Manage existing connections.