Removing the control board – HP LT3200 User Manual

Page 70

Advertising
background image

HP High-Definition LCD TV Service Manual

65

3 Remove the speakers from the LCD module.

Removing the Control Board

You have to remove the main bracket, but do not have to remove the main board or power supply to remove the

control board.
LT3200 Control Board Removal

1 Disconnect the front LVDS cable by pressing the spring-loaded latches on each side of the cable connector, and then

pulling the cable from the connector.

2 Remove the five screws that secure the control board cover to the unit.

3 Lift the cover from the unit.

Note: You cannot remove the ZIF cables from the side of the unit on the 32-inch and 37-inch models.

Advertising
This manual is related to the following products: