HP LT3200 - Manual (Page 74)

HP High-Definition LCD TV Service Manual 69
Removing the Front Bezel
To remove the front bezel, remove the back cover, then put the unit back on the stand, as follows:
1 Remove the stand.
2 Remove the back cover.
3 Remove the IR/keypad assembly.
4 Remove the speakers.
5 Replace the stand and set the TV upright on the stand.
37-inch model with back cover removed
6 Unlatch the plastic tabs that secure the bezel to the unit.
7 Remove the bezel from the unit.
To replace the bezel, place the bezel on a large flat surface, and then place the panel straight down into the bezel.