HP CD-9400 - Manual (Page 10)

10
CHECKING THE TIME REMAINING AND
ELAPSED ON A CD
The display normally shows the current CD and track
numbers, and the current track’s elapsed play time.
Press DISPLAY on the remote control once during play to
display the current track’s remaining time. Press DISPLAY
again to display the current CD’s remaining time. Press
DISPLAY again to display the current CD’s total elapsed time.
During programmed play, pressing DISPLAY twice displays
the total programmed time and the number of the pro-
grammed track playing (see “Programming a Sequence” on
Page 13). During best selection play, pressing
DISPLAY twice
displays the number of tracks stored in the best selection
memory (see “Storing Your Best Tracks” on Page 12).
Notes:
•
The CD changer does not display the current CD’s
total remaining time during programmed, random, or
best selection play.
• The CD changer might not display the remaining time
for tracks numbered greater than 24 on a CD.