HP PROCURVE 530 User Manual
Page 49
3-7
Getting Started With Access Point Configuration
Getti
ng St
art
ed With
Access
Poin
t Co
nfi
gurati
on
5.
To enable radio 1 for the access point, type
exit to return to the configu-
ration mode for radio 1, then type
enable to enable the radio.
6.
To configure the access point’s radio 2 interface, type
radio 2 and repeat
steps 1 to 4. Note that when the radio 2 interface mode is set to 802.11a,
the available channels are 36 to 165, depending on the country setting.
7.
To save all configuration settings from the running configuration file to
the startup configuration file, type
write memory from any command level.
ProCurve Access Point 530(radio1-wlan1)# exit
ProCurve Access Point 530(radio1)# enable
ProCurve Access Point 530(radio1)#
ProCurve Access Point 530(radio1-wlan1)# write memory
ProCurve Access Point 530(radio1-wlan1)#