Maintenance, Cleaning – Husqvarna DRT900E User Manual

Page 14

Advertising
background image

14

MAINTENANCE

MUFFLER

Do not operate tiller without muffler. Do not tamper with

exhaust system. Damaged mufflers or spark arresters could

create a fire hazard. Inspect pe ri odi cally and re place if nec-

es sary. If your engine is equipped with a spark arrester

screen assembly, re move every 50 hours for cleaning and

inspection. Re place if dam aged.

SPARK PLUG

Replace spark plugs at the beginning of each tilling sea-

son or after every 50 hours of use, whichever comes first.

Spark plug type and gap setting is shown in “PRODUCT

SPEC I FI CA TIONS” on page 3 of this manual.

TRANSMISSION

Once a season, lubricate the right hand side gear case

grease fitting with 1 oz. of EP #1 Grease.

CLEANING

Do not clean your tiller when the engine and transmission

are hot. We do not rec om mend using pressurized water

(gar den hose, etc.) to clean your unit un less the gasket

area around the trans mis sion and the engine muf fler, air

fil ter and car bu re tor are cov ered to keep wa ter out. Wa ter

in en gine will short en the useful life of your tiller.
• Clean engine, wheels, finish, etc. of all foreign mat-

ter.

Keep finished surfaces and wheels free of all gas o line,

oil, etc.

• Protect painted surfaces with au to mo tive type wax.

COOLING SYSTEM (See Fig. 22)

Your engine is air cooled. For proper engine performance

and long life keep your engine clean.
• Clean air screen frequently using a stiff-bristled-

brush.

• Remove blower housing and clean as nec es sary.
• Keep cylinder fins free of dirt and chaff.

Fig. 22

Air Screen

Cylinder Fins

Blower

Housing

Muffler

Advertising