Hearth and Home Technologies FB-ZC-S - Manual (Page 13)

Heat & Glo • FB-ZC-S • 2019-910 Rev. G • 11/08 13
Figure 7.1
STAINLESS STEEL
ADAPTER FOR EXHAUST
(MUST BE INSTALLED)
INLET AIR VENT PIPE
3 INCH
COLLAR
OPTIONAL
LINK-ZC-ADPB
(For Flashing Class-A Pipe)
TERMINATION
CAP
(SQUARE FLASHING
REMOVED)
EXHAUST VENT PIPE SUPPLIED
WITH TERMINATION KIT
INLET AIR VENT COLLAR
(LINK-DV30 SHOWN)
ALTERNATIVE INSTALLATION
FOR VENTING THROUGH
WOOD-BURNING
CLASS A PIPE
CLASS A
WOOD PIPE
Note: Inspect for exhaust collar gasket
to insure positive exhaust seal.
LOCKING
TAB
LOCKING
HANDLE
SLIDING PLATE