Philips GC3620 - Manual (Page 16)

Problem Possible cause Solution
The steam
boost
function
does not
work
properly.
You used the
steam boost
function too often
within a short
period.
Continue ironing in horizontal
position and wait a while before
you use the steam boost function
again..
The iron is not hot
enough.
Set an ironing temperature at
which the steam boost function
can be used ( 3 to MAX). Put
the iron on its heel and wait until
the temperature light goes out
before you use the steam boost
function.
Water
droplets
drip onto
the fabric
during
ironing
You have not
closed the cap of
the filling opening
properly.
Press the cap until you hear a click.
You have put an
additive in the
water tank.
Rinse the water tank and do not
put any additive in the water tank.
You have used the
steam boost
function at a
temperature
setting below
3
.
Set the temperature dial to a
setting between 3 and MAX
EnGliSh 16