Setting the temperature, Temperature and steam settings – Philips GC3620 User Manual
Page 9
4
Use the filling cup to fill the water tank with tap water up to the
maximum level. Tilt the iron backwards to check if the water level
has reached the MAX indication (Fig. 4).
Do not fill the water tank beyond the MAX indication.
5
Close the cap of the filling opening (‘click’).
Setting the temperature
temperature and steam settings
Fabric type
Temperature
setting
Steam
setting
Steam boost
Linen
MAX
;
Yes
Cotton
3
;
Yes
Wool
2
l
N.A.
Silk
1
0
N.A.
Synthetic fabrics (e.g.
acrylic, nylon,
polyamide, polyester)
1
0
N.A.
Check the laundry care label for the required ironing temperature.
If you do not know what kind or kinds of fabric an article is made of,
determine the right ironing temperature by ironing a part that is not
visible when you wear or use the article.
Silk, woolen and synthetic materials: iron the reverse side of the fabric to
prevent shiny patches. To prevent stains, do not use the spray function.
Start ironing the articles that require the lowest ironing temperature,
such as those made of synthetic fibers.
1
Put the iron on its heel.
2
To set the required ironing temperature, turn the temperature dial
to the appropriate position (Fig. 5).
See table ‘Temperature and steam settings’.
EnGliSh
9