HP 1175C - Manual (Page 46)

3-10 Copying
Set Defaults
If you consistently use settings on the front panel other than the
default, you can establish those setting as your new default.
NOTE The default setting is always indicated by a solid dot.
You can change default settings for all your front panel options. To
establish new defaults, first set all options the way you want them to
be. Then use the Set Defaults feature to save all the settings.
Here is an example using Auto Fit.
1 Press the Reduce/Enlarge button repeatedly until “Auto Fit” is
displayed.
2 Press Select/Resume . (This step changes your regular
Reduce/Enlarge setting from Normal 100% to Auto Fit.)
3 Press the Menu button until “Set Defaults” appears on the front
panel display.
4 Press the Select/Resume button. The message “Current settings
saved as defaults” is displayed. (This step saves the new
setting—Auto Fit—as your default.)
Factory Defaults
You can return all the front panel settings to their factory defaults at
one time.
To return to Factory Defaults:
1 Press the Menu button repeatedly until you see “Factory
Defaults” on the front panel display.
2 Press Select/Resume .
The message “Returned to factory defaults” appears on the front
panel display.
Clear/Stop
Use the Clear/Stop button to cancel copy settings you have specified
or to stop copying.
◆ When you press the Clear/Stop button to cancel copy settings,
they are reset to default settings.
◆ When you press the Clear/Stop button to stop copying, the phrase
“Copy Cancelled” appears on the front panel display. After a few
seconds, the HP OfficeJet Pro cancels the job.