Husqvarna 966061401 - Manual (Page 39)

OPeRaTION
39
WARNING!
No adjustments or maintenance
should be carried out unless:
the engine stopped •
the ignition key removed •
the parking brake activated •
Manual Transport
IMPORTANT INFORMATION
Tighten the valve moderately.
Do not overtighten the valve when closing.
That can damage the valve seat.
8065-061
Remove fan cover to access release valves
Pump Release Valves
Pump release valves are located at the front and rear
of the pump. They are used to release the system
so the machine may be moved by hand when not
running. Tilt the seat forward and remove the fan
cover to gain access to the pump.
Use a
5 /
8
" wrench or socket and ratchet. Turn the
pump release valve ½ turn. Reverse the procedure to
reset the pump.