Husqvarna 966061401 - Manual (Page 37)

OPeRaTION
37
Stopping the Engine
For all models, move the throttle to the minimum
position (tortoise symbol). For all models, move the
throttle to the minimum position (tortoise symbol).
If the engine has been worked hard, allow it to
idle a minute in order to attain a normal operating
temperature before stopping. To prevent fouling
the spark plugs, avoid idling the engine for longer
periods.
Propane models - after idling, shut off each cylinder
and allow the engine to run until it stops due to lack of
fuel. There is no risk of spark plug fouling.
Disengage the mower deck by depressing the •
blade switch.
8061-013
Disengage the mower deck and move throttle to minimum
Raise the mower deck by pressing the foot pedal •
forward to the transport position.
When the machine is standing still, activate the
•
parking brake by pulling the lever upward.
Turn the ignition key to the stop position.
•
Move the steering controls outward. •
Remove key. To prevent unauthorized use, always •
remove key when leaving the mower.
8065-016
Raise deck to transport position
8065-018
Place controls in neutral position to stop