Technical data – Hilti WSR1000 User Manual

Page 6

background image


The tool is designed for the following uses


Range of uses

Cutting wood

Cutting openings for door and window frames
Cutting wood with embedded nails and screws
Cutting squared timber up to 220 mm thick
Cutting composites (wood, insulation material, metal)
Cutting softwoods and hardwoods
Rip sawing of materials in sheet form
Cutting concrete forming components to length and to size

Cutting metal

Cutting metal pipes of up to 35 mm dia. to length
Cutting plastic pipes of up to 150 mm dia. to length
Cutting openings in metal and plastic pipes
Cutting composites to length (wood, insulation material, metal)


Cutting through metal and plastic pipes
Cutting through cable trays, ventilation ducts and installation channels
Cutting up sheet metal and sheet metal trays
Cutting through gas concrete blocks
Cutting drywall / plasterboard panels

Technical data

WSR 1000

Nominal power rating

1000 W

Nominal voltage ✱

110 V 220 V 230 V 240 V

Nominal current input ✱

11.7 A 5.6 A 5.4 A 5.2 A

Mains frequency

50–60 Hz

Weight of tool

3.95 kg

Dimensions (l×w×h)

570Ч90Ч140 mm

Stroke rate



32 mm

Stroke rate regulation

Variable stroke rate,
4 stroke rate settings

Blade clamp

Keyless, for standard




″ blades

Noise (pressure) level

< 92 dB (A)

Typical vibrational acceleration

< 5.0 m/s


under no load

Orbital action


The tool is offered in different versions for various mains voltages. Please refer to the information on the

type plate for the nominal voltage and nominal current input of your tool.

Main features of the tool

Class II electrical protection (double insulated) Z (as per EN 50144)
Anti-vibration system (additional operator protection)
Mechanical slip clutch (additional gearing protection)
Vibration-absorbing grip
Keyless blade clamp
Saw blade inversion possible
Keyless contact shoe adjustment
Infinitely variable stroke rate preselection with speed control switch

Right of technical changes reserved