Scsi bus configuration, Figure 23 scsi bus 0, 1 configuration screens – HP N1200-320 User Manual
Page 44
44
Visual manager user interface
SCSI bus configuration
When a SCSI bus is selected in the Ports menu, the SCSI Bus Configuration screen is displayed (see
Figure 23
SCSI Bus 0, 1 configuration screens
SCSI bus configuration settings:
•
Primary Initiator ID (default: 7) must be a unique ID.
•
Discovery toggles between Enabled and Disabled, Enabled by default.
•
Bus Reset on Boot toggles between Enabled and Disabled.
When enabled, the network storage router automatically resets SCSI buses during a power-up or
reboot of the library.
•
Discovery Delay is the wait time after a power-up or reboot before discovering SCSI devices. HP
recommends setting the value to at least 30 seconds to ensure that all SCSI devices complete their
individual power-ups.
•
SCSI Override Settings
• Overrides