HP QMS 1660 - Manual (Page 153)

Paper Output
Ramp
6-15 Printer Options
4 Insert the cassette in the cassette installation slot.
Push the cassette straight into the installation slot until it’s firmly
seated.
5 Adjust the media stop to fit the size paper you’re using.
The printer delivers your output print-side down to the output tray
at the top of the printer. The media stop keeps the paper posi-
tioned correctly in the output tray.
Paper Output Ramp
The paper output ramp extends the QMS 1660’s output tray to
accommodate 11.7" x 19.5"/297.18 x 495.30 mm media.
Use the following instructions to install the paper output ramp:
1 Attach one of the Velcro pieces to the back of the media
stopper.
2 Set the paper output ramp on top of the printer output tray.