HP QMS 1660 - Manual (Page 36)

Configuration
Menu
QMS 1660 Print System Reference 4-4
Language Commands
PostScript operators and HP PCL and HP-GL commands can enable
job-specific features your application or page description language
can’t access. Refer to your language documentation for specifics.
Using the Control Panel
Your printer is configured at the factory for the most typical printing
environments, so most users don't have to use the control panel
often. However, if you do need to change a printer setting for all print
jobs (not just on a per-job basis), you can do so through the control
panel. If you are working in a shared printing environment, your sys-
tem administrator should be the only person to make changes
through the printer's control panel.
The rest of this chapter explains how to use the printer control panel
and configuration menu.
Using a Remote Console
Many of the configuration choices that can be made at the control
panel can also be made through a remote console if you’re connected
to a network via an optional network interface. To avoid confusion in a
shared printing environment, only the system administrator should
make configuration changes.
» Note: If a remote console has the printer off line, pressing the Online/
Offline key will not take effect until the console puts the printer back
on line.
Configuration Menu
The printer’s configuration menu allows you change the default
printer configuration settings. In other words, changes you make
affect all subsequent print jobs.