haier DW12-PFE2-E - Manual (Page 25)

23
EN
Plastic items are discoloured
•
Not enough detergent was added to dispenser.
•
Detergent has insuffcient bleaching properties. Use a detergent containing a chemical bleaching agent.
White stains are left on crockery, glasses have a milky appearance
•
Not enough detergent was added to dispenser compartment.
•
Amount of rinse-aid was set too low.
•
Although water is quite hard, no salt has been put in appliance.
•
Water softener was set too low.
•
Lid on salt container is not screwed tight.
•
If you used a phosphate-free detergent , try a detergent containing phosphates and compare results.
Dishes, cultlery, etc. have not been dried
•
Selected programme did not include drying function.
•
Amount of rinse-aid was set too low.
•
Items were removed from dishwasher too soon.
Glasses have a dull appearance
•
Amount of rinse-aid was set too low.
Tea stains or traces of lipstick have not been completely removed
•
Detergent does not have a sufficient bleaching effect.
•
Washing temperature was set too low.
Traces of rust on cutlery
•
Cutlery is not sufficiently rustproof.
•
Salt content in washing water is too high.
- Lid on salt container is not screwed tight.
- Too much salt was spilt while filling container.
Glasses become clouded and discoloured; coating cannot be wiped off
•
Unsuitable detergent was used.
•
Glasses are not dishwasher-proof.
Smears left behind on glasses and cutlery; glasses have acquired a metallic appearance
•
Amount of rinse-aid set too high.