haier DW12-PFE2-E - Manual (Page 3)

1
Safety information EN
At time of delivery
•
Check packaging and dishwasher immediately for signs of transport damage. If the appliance is dam-
aged, do not put it into use but contact your supplier or customer service without delay.
•
Please dispose of packaging materials properly.
During installation
•
Site the dishwasher and connect it up in accordance with the installation instructions.
•
The dishwasher must not be connected to the electricity supply while installation is being carried out.
•
Ensure that the domestic wiring is properly earthed.
•
The mains electricity supply must conform to the details shown on the dishwasher nameplate.
•
Do not connect the dishwasher to the electricity supply via an extension cable.
•
Built-under and built-in appliances should always be installed under a continuous work surface which is
attached to the adjacent cupboards, in order to ensure that the appliance is entirely stable.
•
After the appliance has been installed,the mains plug should still be easily accessible.
•
During installation, the power supply cord must not be excessively or dangerously bent or flattened.
During normal use
•
The dishwasher must only be used by adults for the washing of household dishes and cooking utensils.
•
This appliance cannot be installed outdoor, not even if the area in which it is installed is covered by a
roof; it is also very dangerous to leave it exposed to the rain and elements.
•
Do not place any heavy objects or stand on the door when it is open. The appliance could tip forward.
•
The water inside the dishwasher is not suitable for drinking.
•
Do not use solvents of any kind inside your dishwasher. They could cause an explosion danger.
•
Open the door very carefully if the dishwasher is operating. There is a risk of water squirting out.
•
Fundamental rules to follow when using the appliance:
- Never touch the dishwasher when barefoot or with wet hands or feet;
- We discourage the use of extension cords and multiple sockets;
- If the appliance is not operating properly or maintenance must be performed, disconnect the appliance
from the power supply.