Hitachi DZ-HS500A - Manual (Page 35)

English
35
RESETTING MENU SETTINGS TO DEFAULTS (RESET)
You can restore menu settings to defaults (initial settings at the factory ( p. 152 )). (Note, however, that
the date/time will not be reset.)
1
Choose “Reset” on the
“Initial Setup” menu
screen, and then press
the A button.
The screen for verifying reset will appear.
2
If you are sure that you
wish to reset, use the
d button to choose
“YES”, and then press
the A button.
The setting items have now been reset to
defaults.
Note :
To cancel resetting midway, choose “NO” on the screen
for verification in step 2 or press the C button.
TURNING RECORD LED ON OR OFF (RECORD LED)
You can switch off the recording indicator on the front of DVD video camera/recorder even during
recording.
Select “On” or “Off”, and
then press the A button.
On: The recording
indicator will light
red to show that the
DVD video camera/recorder is recording.
Off: The recording indicator will not light even
during recording.
Note :
• The Record LED setting will not appear in the on-
screen information display.
• The Record LED setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
• Specify “Record LED: Off” when recording a subject
behind a glass or water tank that reflects light: The
reflected light of the recording indicator will not be
recorded.
• Even if “Record LED: Off” is specified, the recording
indicator will light while the self-timer is counting
down.
CHANGING SETTING OF DEMONSTRATION
Choose the desired option
using the screen on the
right, and then press the
A button.
Note :
• If “Auto” is specified, the demonstration will not start if
a battery is connected.
• Pressing the C (STOP/EXIT) or DISC NAVIGATION
button will exit demonstration.
• If “Auto” is specified, the demonstration will not start
when the power switch on this DVD video camera/
recorder is set to “DVD” and a DVD is loaded, or when
the power switch is set to “SD” and a card is loaded.
• The demonstration function will not work when the
DVD video camera/recorder is connected to PC.
• While the demonstration is being given, the recording
indicator will blink.
R e c o r d L E D
P o w e r S a v e
Be e p
ENTER RETURN
Demo Mode
Re s e t
L a n g u a g e
I n i t i a l S e t u p
On
Off
On
English
Auto
ENTER
Re s e t ?
YES NO
Re s e t
R e c o r d L E D
On
P o w e r S a v e
Be e p
ENTER RETURN
Demo Mode
Re s e t
L a n g u a g e
I n i t i a l S e t u p
On
O f f
Auto: To start demonstration if the DVD
video camera/recorder connected to
AC adapter/charger is inactive for
approx. 10 minutes or more after it is
turned on.
Off: To set demonstration to off.
Start: To start demonstration immediately.
ENTER RETURN
Demo Mode
R e s e t
Re c o r d LED
Po w e r S a v e
B e e p
L a n g u a g e
I n i t i a l S e t u p
A u t o
O f f
S t a r t
DZ-HS500A_US.book 35 ページ ２００７年１月１５日 月曜日 午後５時０分