Hitachi DZ-HS500A - Manual (Page 84)

English
84
SELECTING SCENES RECORDED ON HDD AND DUBBING THEM (SCENE
SELECT DUBBING)
You can select desired scenes recorded on HDD and dub only those scenes on discs.
1
Press the DUBBING button.
The Dubbing Menu will appear.
You can also display the Dubbing Menu from
the Disc Navigation screen: Press the DISC
NAVIGATION button, press the MENU
button, choose “Scene”, “Dubbing”,
“Execute”, and then press the
A button.
2
From the Dubbing Menu screen, choose
“Select” and press the
A button.
If no DVD is loaded in this DVD video
camera/recorder, press the DISC EJECT
button, and then load a DVD.
3
Place the cursor on a scene to be dubbed, and
then press the
A or PHOTO/SELECT
button: The cursor of the selected scene will
change to red (see p. 75), and the scene with
red cursor will be dubbed to a disc.
If you wish to dub
other scenes, place the
cursor on a scene in the
same way, and press
the
A or PHOTO/
SELECT button to select it.
To cancel a selected scene, press the
A or
PHOTO/SELECT button again. To cancel all
selected scenes, press
C (STOP/EXIT).
If the total capacity size of the selected scenes
exceeds the remaining free space on disc, the
remaining bar at the top right of screen will
be red, and a message will appear. Select the
scenes again.
If you select a scene exceeding 1.4 GB, the
message that prompts you to divide it will
appear: After dividing the scene, execute
dubbing again.
4
Press the DUBBING button.
The screen for verifying dubbing will appear.
Instead of pressing the DUBBING button, you
can press the MENU button, choose “Edit”,
and then “Enter”: The same screen will
appear.
Choosing “YES” will start dubbing.
To cancel dubbing, choose “NO” or press
C
(STOP/EXIT).
5
When dubbing is finished, check the “Delete
Scene” screen.
Choosing “YES” will delete the dubbed
scenes from the HDD.
To retain the dubbed scenes on the HDD,
choose “NO”.
6
Press the DISC EJECT button to remove the
disc.
Close the cover of disc insertion block.
Press
C (STOP/EXIT) to end dubbing.
TURNING OFF DUBBED MARK FROM THUMBNAIL
If the dubbed mark makes the thumbnail difficult to see, you can turn off the mark.
1
Press the DISC NAVIGATION button, and
then press the MENU
2
Choose “Scene”,
“Dubbing”, “Mark
Off”, and then press the
A button.
The “Cancel Dubbed
Mark” screen will appear.
3
Place the cursor on a scene for which you
want to turn the dubbed mark off, and then
press the PHOTO/SELECT button.
You can also select multiple scenes.
4
If there is no change in the scene for which
you want to turn the mark off, press the
A
button.
5
Press the C (STOP/EXIT) button to end the
mark-off procedure.
Note :
• You can use “New” dubbing to dub scenes with the
dubbed mark turned off.
• Pressing the MENU button in step 3 will display the
submenu screen (see “Editing using submenu” on
page 86 ).
D u b b i n g ( S e l e c t )
ENTER SELECT DUB
S c e n e
ENTER RETURN
E x e c u t e
Ma r k O f f
Dubbing
DZ-HS500A_US.book 84 ページ ２００７年１月１５日 月曜日 午後５時０分