Huffy Sports Basketball Systems - Manual (Page 12)

12
P/N 21145507 02/04
1
7
9
9
FRONT SIDE
9.
Install pole mount bracket (7), bracket
reinforcement (44) with carriage bolts
(8) as shown. Tighten flange nuts (9)
completely.
44
8
8
1
5
WOOD SCRAP
(NOT SUPPLIED)
7.
Install ground sleeve cap (5) onto
bottom pole section (1). Stack and
bounce bottom (3) and middle (2)
pole sections together. Bounce
pole sections together until middle
section no longer moves toward
taped reference mark on bottom
pole.
2
5
3
WOOD SCRAP
(NOT SUPPLIED)
8.
Stack upper pole section (1) to bottom
pole assembly and continue bouncing
until top pole (1) no longer move toward
taped reference mark.
Taped reference marks
POLE SECTIONS SHOULD
HAVE A 3-3/4" (9.5 CM)
MINIMUM OVERLAP.
IMPORTANT!: