Harbor Freight Tools GREYHOUND 56072 - Manual (Page 9)

SKU 56072 For technical questions, please call 1-800-444-3353. Page 9
Raise the Engine and Oil Tank 1.
Assembly about 9 inches onto
a secure platform. Connect the
Wheels to the axles using the
supplied hardware (parts 53 - 55)
as previously stated. (It may be
necessary to reset the wheel
bearings after the Log Splitter has
been towed.)
With the Engine and Oil Tank
2.
Assembly still raised, attach the Rail
Assembly (19) using Hex Bolts (24)
and Hex Nuts (32). Pay attention to
the directional Arrows on the unit.
They will aid in assembling the unit in
the proper orientation.
Figure a
3. Use Hex Bolt (43) to install the sup-
port assembly - See Figure A.
The Push Pin (42) is used for both
4.
standing and towing positions.
Install the Hitch Coupler (39) onto the
5.
Rail Assembly (19), using the Hex
Bolts (09, 35), a Washer (36), and
Hex Nuts (38, 30).
Figure B
6. Install Bezel (45), with 6 sets of Hex
Nuts (30) and Hex Bolts (37) - See
Figure B.
Figure c
7. The control valve stand is attached
onto the oil reservoir with 4 Hex Bolts
(70) - See Figure C.