HP PC460T - Manual (Page 79)

74 75
Troubleshooting
Problem Cause and/or Action
Camera does not turn on. The battery may be exhausted. Charge or replace the battery.
Camera turns off automatically. Press any button except the Power button to power on the camera.
LCD turns blank. Press any button except the Power button to turn on the LCD.
Empty battery icon is displayed on
the LCD, and then the camera turns
off.
One or both of the battery may be exhausted. Charge or replace the battery.
LCD screen displays ‘No images in
memory’.
The image file on the memory card. Image file format may not be supported.
LCD screen displays ‘Not available
for this file’.
Function is only available for specific file types. File format is not supported.
LCD screen displays ‘Memory full’.
Memory card is full. Replace the memory card with a new one or delete
unnecessary images.
LCD screen displays ‘File locked’ This file is locked. Unlock the file.
LCD screen displays ‘Card locked’.
The memory card is protected. Remove the card and slide the write-protect
switch to it’s unlock position.
LCD screen displays ‘CARD HAS
WRONG FORMAT’.
The memory card is protected. Remove the card and slide the write-protect
switch to it’s unlock position.
LCD screen displays ‘Copy error’.
The memory card is protected. Remove the card and slide the write-protect
switch to it’s unlock position. The memory card is full. Replace card or delete
unnecessary files.
The lens is extended and will NOT
retract.
Do not force the lens to go back. The type of the battery used may be
incorrect or the battery power level is too low. Change the battery or charge
the battery before using the camera.