HP 470 series - Manual (Page 23)

Do not touch here
Insert the cartridge
1.
If you are replacing a cartridge,
push down and pull outward on the
cartridge in the cradle to remove it.
2. Hold the replacement cartridge with
the label on top. Slide the cartridge
at a slight upward angle into the
cradle so the copper-colored
contacts go in first. Push the
cartridge until it snaps into place.
3. Close the print cartridge door.
Note To see the ink level of the print
cartridge, press Menu , select Tools ,
press OK , then select Cartridge status .
Each time you install or replace a print
cartridge, a message appears on the
printer screen asking you to load plain
paper so the printer can align the
cartridge. This ensures high-quality prints.
Align the cartridge
1.
Load paper in the In tray and press
OK .
2. Follow the onscreen instructions to
align the cartridge.
See Aligning the print cartridge .
When you are not using a print cartridge
Whenever you remove a print cartridge
from the printer, store it in a print
cartridge protector. The cartridge
protector keeps the ink from drying out.
Storing the cartridge improperly can
cause the cartridge to malfunction.
➔ To insert a cartridge into the
cartridge protector, slide the
cartridge into the protector at a
slight angle and snap it securely
into place.
Chapter 2
Insert or replace the print cartridge (continued)
18 HP Photosmart 470 series