Humax CXC-2000PVR - Manual (Page 31)

**
5.6 Additional Time Shift Operations Using Time Bar
You can perform additional time shift operations using the 5 operation buttons on the right side of the
time bar.
1. Slow Motion
Select SLOW MOTION and then press the OK button to play the current programme in
slow motion. Press SLOW MOTION once again to play the programme at normal speed.
**
2. Direct Jump
Select DIRECT JUMP and then press the OK button. A moving arrow appears in progress
bar. Move this arrow to a desired time point using the button, and then press the OK button
to play the programme from the specified time point.
**
3. Replay
Select REPLAY and press the OK button, to replay the current programme from the 7
seconds before. When the replay has been completed, the programme is normally played from the
point.
**
4. Skip
Select SKIP and then press the OK button to play the programme from the time point 30
seconds forward from the current watching point.
You can use the skip operation only when there is a time difference between the current watching
and the broadcasting point while you use the fast forward operation. If the time difference is less than
30 seconds, the programme is played from the current broadcasting point.
**
5. Displaying a Playlist
Select PLAYLIST and press the OK button to display
the currently saved programme list.
Select desired programme and then press the OK button to
playback the programme.
You can perform the time shift operations like VCR functions
using the Playback control buttons while playing a programme.
Press the STOP button to stop playing the current saved
programme, and watch the current programme on air.
**
5. Time Shifted Recording
GB 30
**
**
**
**
**
**
**
**
**
**
**
**
**
**