Recording and playback – Humax CXC-2000PVR User Manual
Page 32
**
You can record a programme without an external media device such as a VCR.
6.1 Instant Recording
Press the REC
button on the remote controller to record the current programme instantly.
Press the STOP
button to stop recording.
Note:
•
You cannot change channels during the recording operation.
•
Ensure that there is enough free space before recording, because if the free space on the
hard disk drive is insufficient, recording will stop. Recording 1 hour of programme may require
up to 3GB of free space of hard disk space. The space for recording 1 hour of programme
may be different depending on the programme recorded.
6.2 Recording Reservation
You can reserve recording to record your desired programme automatically. You can reserve
recording of a programme using Menu - Record - Recording Schedule and Guide. For detailed
information on recording reservation using Guide, refer to Chapter 8 .
1.
Press the MENU
button.
2.
Select Record using the
button and press the OK
or
button.
3.
Select Recording Schedule using the
button and
press the OK
or
button to display the reserved
recording list on the screen.
4.
Select a blank list and press the OK
button to add a
new recording reservation.
5.
Select the reserved list and press the OK
button to
edit the existing reservation information.
1. Adding Recording Reservations
1.
Enter Channel Number using the NUMERICAL (0~9)
buttons. The channel name changes automatically
according to the input channel number
2.
Enter Recording Start Time using the
button, and
NUMERICAL (0~9) buttons.
3.
Enter Recording End Time using the
button, and
NUMERICAL (0~9) buttons.
4.
Select Repeat mode from Once/Daily/Weekly using the
button.
**
6. Recording and Playback
GB 31
**
**
**
**
**
**
**
**
**
**
**
**
**
**