HP f2304 - Manual (Page 8)

2–2 User’s Guide
Safety and Maintenance Guidelines
Å WARNING: For the protection of your monitor, as well as your
computer, connect all power cords for your computer and its
peripheral devices (such as a monitor, printer, scanner) to some form
of surge protection device such as a power strip or Uninterruptible
Power Supply (UPS). Not all power strips provide surge protection;
the power strips must be specifically labeled as having this ability.
Use a power strip whose manufacturer offers a Damage
Replacement Policy so you can replace your equipment if surge
protection fails.
Maintenance Guidelines
To enhance the performance and extend the life of your
monitor:
■ Do not open your monitor cabinet or attempt to service
this product yourself. Adjust only those controls that
are covered in the operating instructions. If your monitor
is not operating properly, or has been dropped or
damaged, contact your HP authorized dealer, reseller,
or service provider.
■ Use only a power source and connection appropriate
for this monitor, as indicated on the label/back plate of
the monitor.
■ Be sure the total ampere rating of the products connected
to the outlet does not exceed the current rating of the
electrical outlet, and the total ampere rating of the
products connected to the cord does not exceed the
rating of the cord. Look on the power label to determine
the ampere rating (AMPS or A) for each device.
■ Install your monitor near an outlet that you can easily
reach. Disconnect the monitor by grasping the plug
firmly and pulling it from the outlet. Never disconnect
the monitor by pulling the cord.