HONDA HRB216TDA - Manual (Page 63)

TECHNICAL & CONSUMER INFORMATION
61
Maintenance
Tuneup
Fuel Unleaded gasoline with a pump octane
rating of 86 or higher. See page 38.
Engine Oil SAE 10W-30, API SH or SJ See page 34.
Spark Plug Type Regular: NGK - BP6ES or
DENSO - W20EP-U
Resistor: NGK - BPR6ES or
DENSO - W20EPR-U See page 36.
Maximum Governed
Speed 2,950 ~ 3,100 rpm See shop manual.
Flywheel Brake
Cable Adjust for 3/16~3/8 in (5~10) free play at
flywheel brake lever. See page 40.
Drive Clutch Cable Adjust for 1/16~3/16 in (1~5 mm) free
play at drive clutch lever. See page 41.
Shift Cable Adjust for proper position of shift lever. See page 42.
Throttle Cable Adjust for clearance on control arm. See page 43.
Blade Bolt Torque 36~43 ft-lb (49~59 N•m) See page 32.
Spark Plug Gap 0.028 ~ 0.031 in (0.7 ~ 0.8 mm) See page 37.
Idle Speed
(throttle lever at SLOW) 1,700 ± 150 rpm See shop manual.
Valve Clearance (cold) Intake: 0.15 ± 0.04 mm
Exhaust: 0.20 ± 0.04 mm See shop manual.
Other Specifications No other adjustments needed.
HRB216 TDA (zone start).book Page 61 Monday, March 26, 2001 1:05 PM