HP 250C - Manual (Page 77)

6Ć19 Removal and Replacement C4699Ć90000
11 Carefully pull the encoder strip to the
right, through and out of the carriage
assembly.
12 Lay the encoder strip on a flat surface.
Reinstalling the EncoderStrip
1 Move the cartridge carriage to the left,
overthe service station.
2 Ensure that the encoder strip is oriented
with the transparent area up, and with
two holes on the left side and one hole on
the right side.
W A R N I N G
In the following steps, take
care neither to cut yourself
on the encoder strip, nor to
damage the strip.
3 Feed the encoder strip through the
cartridge carriage from right to left.
4 Temporarily, rest the loose strip safely on
the drive roller.
5 Slip the left end of the strip over the
plastic pin on the left bracket, and press it
right to the base of the pin.