HONDA 2009 Fit - Manual (Page 175)

Connecting an iPod
1. Open the upper glove box, and pull
out the USB adapter cable.
2. Connect your dock connector to
the iPod correctly and securely.
3. Install the dock connector to the
USB connector securely.
When the iPod is connected and the
iPod mode is selected on the audio
display, the iPod indicator is shown
on the screen. After loading, you will
see Honda mark
ꭧ on the iPod. That
means you can only operate your
iPod using the vehicle
’s audio unit.
ꭧ : It may take a few minutes for the
Honda mark to display on the iPod. If
the display does not change, this
function is not supported on your
iPod model or firmware.
USB CONNECTOR
USB ADAPTER CABLE
DOCK CONNECTOR
USB CONNECTOR
Sample Display
OK to disconnect.
Playing an iPod ® (Models with navigation system)
172 2009 Fit
Table Of Contents Main Menu