Changing a flat tire – HONDA 2009 Fit User Manual
Page 293
Advertising
Installing a wheel cover
All models except Sport and Canadian
LX model with manual transmission
1. Make sure the wire support ring is
hooked into the clips around the
edge of the wheel cover.
2. Align the valve mark on the wheel
cover to the tire valve on the
wheel, then install the wheel
cover.
3. Make sure the wire support ring is
on the outer side of the tire valve
as shown.
CLIPS
CLIPS
WIRE SUPPORT RING
Changing a Flat Tire
290
2009 Fit
Table Of Contents
Main Menu
Advertising
This manual is related to the following products: